Category: Tool Rolls

Posted on by

Embroidery / Personalised Items

Embroidered Logbook Covers

Many of our products have embroidered text as an option for personalisation. Most products can have it added as a custom order.

There are two different types of embroidery: Text in a range of font types and colours and Logos or pictures embroidered. Text is charged per sections of just letters and logos or pictures have a one-off set-up fee (currently $30) plus per item fee.

As we have the embroidery done out of house there is an increased wait time for embroidered items. This can be one or two weeks in some cases.

If an item with embroidery needs to be waterproof it is best sprayed with a waterproofing spray as the embroidery thread does not swell into the stitch holes in the way that the thread used for construction does.

Below are some of our products that often have embroidery added but pretty much any can be embroidered. Let your imagination run wild!

Knife Roll
Keyrings with red and silver embroidered text
Truck Logbook Cover
Wine Bag Holder
Embroidered Tool Roll
Tool Roll
Embroidered spanner roll
Black with bright blue embroidery
Firewood Sling
Firewood Sling in Sand canvas
Spanner Rolls
Toilet Roll Holder
Toilet Roll Holders
Posted on by

Custom Spanner Roll

Customer email: I would like to order two custom canvas spanner rolls for a Gearwrench 8-22 + 24 spanner set that has fixed ratchets at the round ends of the spanners. Please note these round ends (that will slide into each bay of the bag) are approximately one and a half times wider than the round ends of normal flat spanners, so the bays would need to be wider (please see image). The two rolls should be exactly the same. I would like both in khaki canvass, and both with the two strap option (similar to your motor vehicle tool roll). Please let me know if this is doable, what the cost would be, and if you require any further information to proceed?

Reply: Thanks for your email. This is doable but I will need a photo of the spanners laid out with a measure below and beside to know how large to make the pockets.

The customer sent accurate sizes and photos. Below are finished rolls.

Posted on by

Tool organiser for Tool Box Lid

Tool organiser

  • 490mm wide x 320mm wide overall with a small amount taken off the corner (the box has a small curve at the corner and taking a small triangle off the corner will stop the fabric getting caught in the lid seal)
  • 12 snap fasteners on the back side (opposite side to the pockets) snaps are 15mm from the edge to the centre, 50mm from the corners and the middle ones are in the centre. (photo attached showing snap positions)
  • 8 pockets (or 7 pockets if you think the screwdriver in the middle would be better with a elastic loop instead of a pocket)
  • 3 elastic loops
Posted on by

Custom Tool Roll for Florist

“Hi Naz
Thanks for the chat just now, here are the photos of the gear to fit in the roll (attached)
I think the design how you have the garden rolls on your website is pretty close – with the smaller pocket on the left for seeds/sachets/wire and the larger flat section behind for other larger loose stuff. Just so long as the other tools fit i guess. Colour was Brunswick Green.”

Posted on by

Archaeology Tool Roll

“Hello Naz,
I phoned you this afternoon expressing interest in a custom tool wrap. My girlfriend is an archaeologist and in the field they use wraps to hold tools used during their excavations.

As such, for a birthday present, I would like to inquire as to the price of a custom tool wrap for excavation tools.
The tools are:
-a tablespoon and a teaspoon
-a collapsible ruler
-a 150mm pointing trowel
-a small pick (still in post, represented in photograph by a white silhouette matching the exact size)
-a 22mm corner paintbrush
-a 50mm framing paintbrush
-4 long nails bound together
Collectively, the items look like this to scale:

I was thinking that this order would be best to roll but if you feel it will not work I defer to your best judgment. I feel most of these tools will fit within existing pouch designs seen on your website for screwdrivers or pliers.
If there are any problems, please let me know, I can provide additional measurements if need be (I can send photos of individual items for their sizes).
I look forwards to hearing from you soon.”

The tool roll was embroidered with her name so that is blurred out.

Posted on by

Custom Spanner Roll

Custom Spanner Roll

The brief:

We need a replacement tool roll for our workshop spanner set. The clear pockets have perished and the spanners now fall out the bottom.

I’ve prepared a scale drawing (attached) having measured the original roll… Would also like to include a 21mm spanner.

The custom spanner roll we made is very similar to our standard canvas spanner roll but more pockets and a ripstop base.

Posted on by

More Custom Tool Rolls

Custom Canvas Tool Roll
Custom Canvas Tool Roll

This is a pair of custom tool rolls to store special furniture assembly tools. The customer sent a picture of the tools laid out with a ruler down one end and side so that I could work out the pockets. It has eyelets in the top flap so that it could be hung while using the tools.